Reference documents are available here to assist customers in their specific applications or with specific functions. The technical support notes are listed in two different sections, exhaust gas analysis and modified atmosphere packaging.
Exhaust Gas Analysis
01 Exhaust Gas Analyzer Lambda Worksheet – Brettschneider Calculation – Spreadsheet
03 Single Piece Compact Probe vs Two Piece Extended Probe
04 Serial Printer p/n 106430 Hardcopy Gas Test Report Format
06 ‘Lo’ Indication on the O2 Display on Exhaust Gas Analyzers
09 Measuring Emissions from Diesel Fueled Equipment
10 Instructions for Changing the NOx Sensor (p/n 000121)
11 MAP O2 Sensor Changing Instructions
12 Emissions from LPG Fueled Equipment
14 Factory DIP Switch Settings for Seiko DPU–414 Serial Printer (p/n 106430)
15 Gasoline Fueled Engine Emissions
16 Printer Re-Flash Seiko DPU-414 Serial Printer (106430)
17 Air Dilution Correction using O2 and CO2
18 LPG Exhaust Gas Emissions – Regulatory Agency Requirements and Maintenance Factors
19 Using the Oxygen and CO2 Gas Levels to Detect Air Dilution
21 High Performance Tuning – Engine Exhaust Gas Levels
22 Using a Hard Seal Exhaust Port for Improved Diagnostics
23 Emissions from CNG Fueled Equipment
28 Tailpipe Testing of Emissions Control California Forklift Retrofit Kits
29 Advantages of a 4 or 5 gas analyzer over a CO only or a 2 gas analyzer measuring CO, HC.
29A Advantages of a 4 or 5 gas analyzer over a 2 gas analyzer measuring CO and HC.
30 Checking for Air Leaks During Calibration on an Emissions Gas Tester
35 Water Trap Field Test on Emissions Gas Tester
37 Troubleshooting High Oxygen Readings on a 4 gas analyzer or 5 gas analyzer
38 Troubleshooting low CO and HC Readings on a 2 Gas Emissions Analyzer
39 Quebec Forklift Emissions Program
Reference Collection for Forklift Emissions Guidance: Tech Support Notes 12, 18, 19. White Paper 14, 18.
Modified Atmosphere Packaging
05 MAP Analyzer ‘Lo’ and ‘Off’ Oxygen Sensor Display Prompts Explained
07 Diagnosing Low Sample Gas Flow on MAP Analyzers
11 Instructions for Changing the O2 Sensor on MAP Units
24 Calibrating a Model 900131 on Lo-Ox (Tri-Gas) or Hi-Ox Gas Mixes
25 Test Protocol for Hi-Ox Gas Mixes, Case Ready Meat Packaging
26 Testing Protocol for Lo-Ox Case Ready Meat Packaging Gas Mixes
32 9006 Oxygen Analyzer ‘Lo’ or ‘Off’ O2 Sensor Troubleshooting
33 Use of Non-Bridge Sample Needles and Filters on MAP Analyzers
36 Calibration Recommendations for O2 only and CO2/O2 MAP Analyzers
40 900133 Operating Protocol for Lo-Ox Case Ready Meat Packaging Gas Mixes